Production process

How we make your custom metal crafts

Twelve steps take your logo from artwork to a packed shipment. Samples usually take 3-8 days and production 7-15 days, depending on the item.

  1. Artwork design

    Free artwork to your brief, sent for approval

  2. Mould tooling

    Short tooling cycle for metal and plastic moulds

  3. Stamping, pressing or die-casting

    The method depends on shape and detail

  4. High-precision pressing

    For complex shapes and crisp edges

  5. Cutting

    Laser or hydraulic cutting to the outline

  6. Attachments

    Pins, clips, rings or other fittings fixed on

  7. Polishing

    Removes burrs and refines the surface

  8. Plating

    Gold, silver, nickel, antique and more on our own line

  9. Colouring

    Machine colouring for even, stable colour

  10. Baking

    Cures the colour for durability

  11. QC and packing

    Checked before packing

  12. Shipping

    Air express, air freight or sea

Artwork and moulds

Artwork is best created in Adobe Illustrator or CorelDRAW, with each colour specified by its Pantone Solid Coated reference. Cutting moulds follow the outline of your design; an inner cut-out may need an extra cutting mould.

Inspection and packing

Items go through in-process checks and a final inspection before packing.

Shipping

Small parcels and rush orders ship by air express (DHL, FedEx, TNT or UPS) at discounted rates. Large or non-urgent orders go by air freight or sea. Large orders take about 15 days, and urgent orders can use express service.

Hand engraving a die for a medal
Pin and badge crafts

Seven ways to make a metal pin

CraftHow it is madeMetalsBest for
Hard enamel (cloisonne)Glass-like enamel powder, hand-filled and fired one colour at a time, then hand-polishedCopperFlat, polished, glossy colour that resists fading
Imitation hard enamelSynthetic pigment with a look close to hard enamelCopper, bronze, iron, aluminiumLower cost and faster than hard enamel, wide colour choice
Soft enamelColour hand-filled into recessed areas and baked; raised metal linesCopper, bronze, iron, aluminiumTextured surface, good for 3D and fine detail; optional epoxy dome
Iron soft enamelSame process as soft enamel on ironIronThe most economical die-struck option
Photo etchedDesign chemically etched into 0.8 mm brass sheetCopper, bronze, stainless iron, aluminiumLight and economical for large sizes; no 3D
Die struck, no colourStruck metal with a plated or textured finish onlyCopper, bronze, iron, stainless iron, aluminiumSandblast, two-tone, antique, satin or matte finishes
Screen or offset printedLogo printed (spot colours or CMYK) and sealed with epoxyCopper, bronze, stainless, aluminiumGradients and photos; fast for large quantities

Hard enamel colours are fired one at a time, which stops colours bleeding into each other and keeps them bright for years. Imitation hard enamel gives a similar look at lower cost, with faster delivery and more colour choices. Soft enamel is baked so the colour settles evenly, and an epoxy coating can be added for extra protection.

Iron soft enamel looks much like copper soft enamel but costs less, because iron is cheaper and needs less polishing and plating. A quick way to tell them apart: a magnet sticks to iron. Photo etched pins use a 0.8 mm brass sheet; they are light and economical for large designs but cannot be made in 3D. Printed pins need epoxy to protect the print; offset printing (CMYK) handles gradients.

The total lead content of our enamel colours and printing inks is tested to the US CPSIA HR4040 specification.

Lanyards

Lanyard materials and sizes

Common lanyard widths are 10, 15, 20, 25 and 35 mm, with a thickness of 0.8-1.5 mm and a standard circumference of 90 cm (45 cm when worn). Length, width and special sizes can be customised. Standard lanyards use double-stitched joints and can reach a breaking strength of 120 N or more.

Webbing options include heat-transfer polyester, nylon, tubular (hollow) webbing, jacquard and high-speed woven webbing. Logos can be screen printed, heat-transferred or sublimated, or woven straight into the strap.

See custom lanyards

Screen printing

Saturated, durable colour for one- or few-colour logos. Not for gradients.

Heat transfer and sublimation

Multi-colour artwork and light gradients with a smooth surface.

Jacquard weaving

The logo is woven in and never wears off. Longer setup, better for larger runs.

Attachments

Metal hooks, lobster clasps, safety breakaways, badge reels, ID clips, carabiners, whistles and LED lights.

Get a quote

Tell us what you need

Send your logo, size and quantity. Our sales team is online 24 hours and replies within 8 hours with a quote and a free artwork proof.

Prefer email? Send artwork to order@ty-gifts.com.